SUSE Linux

From DikapediaV2
Revision as of 14:27, 11 September 2024 by Ardika Sulistija (talk | contribs) (Created page with "====SUSE Public Cloud Infrastructure Update==== ---- SUSE has recently made changes to their Public Cloud Update Infrastructure starting June 1, 2020, which is known to cause issues when trying to reach the SUSE repositories as the repositories were no longer present. SUSE has shifted from IP based restrictions to Instance billing code-based restrictions. Per SUSE's official documentation [1], the instances must upgrade the package "<b>cloud-regionsrv-client</b>" to ve...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

SUSE Public Cloud Infrastructure Update


SUSE has recently made changes to their Public Cloud Update Infrastructure starting June 1, 2020, which is known to cause issues when trying to reach the SUSE repositories as the repositories were no longer present. SUSE has shifted from IP based restrictions to Instance billing code-based restrictions. Per SUSE's official documentation [1], the instances must upgrade the package "cloud-regionsrv-client" to version 9.0.0 or greater. Therefore, it requires users to update the required packages manually. For more information about this change in SUSE Update Infrastructure, please refer to documents [1,2].

[1] Public Cloud Infrastructure Update:
https://www.suse.com/support/kb/doc/?id=000019633

[2] SUSE Update Infrastructure Access Through the Data Center:
https://www.suse.com/c/suse-update-infrastructure-access-through-the-data-center/

Steps: 1) Confirm the instance has a billing product code and is not "null", e.g. "billingProducts”: [“bp-XXXX”]. If an Instance is launched with custom SLES AMI, which is registered before June 2019, such an instance could be more prone to missing “billingProducts” issues: 

$ curl -s http://169.254.169.254/latest/dynamic/instance-identity/document | grep -i billing
"billingProducts" : [ "bp-6ca54005" ],

2) Since the the above command showed a billing code, we were able to proceed to the next steps to update the "cloud-regionsrv-client" package by following SUSE's documentation [1] 

# rpm -qa  cloud-regionsrv-client
cloud-regionsrv-client-7.0.5-51.1.noarch   <------ (old version)

# wget --no-check-certificate https://52.15.49.139/late_instance_offline_update_ec2_x86_64_SLE12.tar.gz

# tar -xf  late_instance_offline_update_ec2_x86_64_SLE12.tar.gz

# cd x86_64 

# zypper --no-refresh --no-remote --non-interactive in *.rpm

# zypper ref

# rpm -qa  cloud-regionsrv-client
cloud-regionsrv-client-9.0.10-52.33.1.noarch   <------ (new 9.0 version)

3) Attempt registration: 

# registercloudguest --force-new

4) Verify the host is registered: 

# SUSEConnect -s

5.A) If the registration fails, share the below output for review: 

# rpm -qa | grep -iE "cloud-regionsrv-client|regionServiceClientConfigEC2|regionServiceClientConfigSAPEC2|ec2metadata|SUSEConnect|libzypp|ruby-common"
# registercloudguest --force-new
# SUSEConnect -s
# cat /var/log/cloudregister

5.B) If you are still getting an error such as There are no enabled repositories defined... Use 'zypper addrepo' or 'zypper modifyrepo' commands to add or enable repositories, you can run the following command: 

$ /usr/sbin/registercloudguest --force-new


Zypper Cheatsheet

https://en.opensuse.org/images/1/17/Zypper-cheat-sheet-1.pdf
https://en.opensuse.org/images/3/30/Zypper-cheat-sheet-2.pdf


Where are repositories located

$ ls -al /etc/zypp/repos.d


Add notes: [+] SUSE - Basic Networking https://documentation.suse.com/sles/15-SP1/html/SLES-all/cha-network.html#sec-network-addresses

[+] openSUSE Documentation - 21.6. Configuring a Network Connection Manually https://www.pks.mpg.de/~mueller/docs/suse10.2/html/opensuse-manual_en/manual/sec.basicnet.manconf.html

[+] make ip route and ip rule permanent on SLES15 SP1 https://forums.suse.com/discussion/comment/58961#Comment_58961

[+] SLE 15 - Configure a static network address while in the Rescue System https://www.suse.com/support/kb/doc/?id=000019454

[+] SUSE LINUX – Administration Guide - Chapter 14. Linux in the Network / 14.3. Manual Network Configuration https://www.novell.com/documentation/suse91/suselinux-adminguide/html/ch14s03.html#sec:netz.conf.dateien

[+] Configure Static IP on SUSE Linux https://sahlitech.com/configure-static-ip-on-suse-linux/

[+] Configure Static Ip using the Terminal https://forums.opensuse.org/showthread.php/431523

[+] SUSE LINUX – Administration Guide https://www.novell.com/documentation/suse91/suselinux-adminguide/html/ch14s05.html

[+] ip rule http://linux-ip.net/html/tools-ip-rule.html

[+] Multi-NIC with cloud-netconfig in EC2 and Azure https://suse.com/c/multi-nic-cloud-netconfig-ec2-azure/


Download image

https://www.suse.com/download/sles/


If you boot up sles machine but can't access public internet or resolve DNS

Check if ipv6 is enabled. Run: 

ip addr show

If you see inet6, that means IPv6 is enabled and may be causing routing issues.

Disable IPv6: https://www.suse.com/support/kb/doc/?id=000016980


How to add drivers for Nitro on AWS EC2

https://www.suse.com/c/changing-instance-types-in-aws-for-sels-12-sp2-and-sles-12-sp3-based-hvm-instances/

For SLES 12 SP4 and earlier based instances: 

echo 'add_drivers+=" ena ext4 nvme nvme-core virtio virtio_scsi xen-blkfront xen-netfront "' >> /etc/dracut.conf.d/07-aws-type-switch.conf && mkinitrd

For SLES 12 SP5 and later based instances 

echo 'add_drivers+=" ena ext4 nvme nvme-core xen-blkfront xen-netfront "' >> /etc/dracut.conf.d/07-aws-type-switch.conf && mkinitrd


How to add drivers to initrd file

mkinitrd -A -v -m "$xen_drivers" -k "${KERNEL_NAME}" -i "${INITRAMFS_TMP_NAME}"

or 

(obsolete -f)
mkinitrd -f -v -m "$xen_drivers" -k "${KERNEL_NAME}" -i "${INITRAMFS_TMP_NAME}"

or 

dracut --no-host-only -v --force --force-drivers 'xen-scsifront xen-netfront xen-blkfront nvme-core nvme ena' --omit 'multipath'  aws-launch-initrd-4.12.14-94.41-default 4.12.14-94.41-default

Exmaple: (FOR SUSE15 SP2) 

$ mkinitrd -f -v -m "xen-scsifront xen-netfront xen-blkfront nvme_core nvme ena" -k vmlinuz-`uname -r` -i /boot/CloudEndure-Migration-initrd-`uname -r`


SLES and Nitro bug "multipath"

Some SLES version have this bug on Nitro regarding multipath.

Multipath is not supported on EC2. Due to this the LVM does not getting detected as /dev/nvme0n1p1 as the device naming under /dev gets completely changed. However, for whatever reason, it is compatible with Xen platform but not with Nitro Platform. Therefore, some SLES instance boots successfully on xen but fails on nitro as the OS is unable to find PV devices of the VG.

The issue can also occur on systems that do not have LVM on the source (i.e. SLES12 SP5). Upon launching as nitro, the UUID's end up pointing to device multipath devices (i.e. dm-0) instead of nvme0n1. This is causing the system to see it as multipath devices and thus will fail to boot.

If you boot up SLES on Nitro and the devices become like this: 

# dmsetup info
Name:              nvme.1d0f-766f6c3039623963363664636632653836633639-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001
State:             ACTIVE
Read Ahead:        1024
Tables present:    LIVE
Open count:        2
Event number:      0
Major, minor:      254, 0
Number of targets: 1
UUID: mpath-nvme.1d0f-766f6c3039623963363664636632653836633639-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001

Run multipath command to confirm: 

# multipath -ll
nvme.1d0f-766f6c3039623963363664636632653836633639-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001 dm-0 NVME,Amazon Elastic Block Store              
size=16G features='0' hwhandler='0' wp=rw
`-+- policy='service-time 0' prio=1 status=active
  `- 0:0:1:1 nvme0n1 259:0 active ready running

That means the NVMe local device was identified as multipath device. So you need to add multipath=off in the grub kernel parameter or remove the multipath module from the initrd file.

Permanent solution: edit /etc/default/grub and add the multipath=off parameter in "GRUB_CMDLINE_LINUX_DEFAULT". and then rebuilt initrd.


HOW TO LAUNCH SLES12 SP5 SUCCESSFULLY AS NITRO

[+] Source: 

# uname -r
4.12.14-122.173-default

# cat /etc/*release
NAME="SLES"
VERSION="12-SP5"
VERSION_ID="12.5"
PRETTY_NAME="SUSE Linux Enterprise Server 12 SP5"
ID="sles"
ANSI_COLOR="0;32"
CPE_NAME="cpe:/o:suse:sles:12:sp5"
SUSE Linux Enterprise Server 12 (x86_64)
VERSION = 12
PATCHLEVEL = 5
# This file is deprecated and will be removed in a future service pack or release.
# Please check /etc/os-release for details about this release. 

# lsblk
NAME   MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
sda      8:0    0   10G  0 disk 
├─sda1   8:1    0  1.3G  0 part [SWAP]
└─sda2   8:2    0  8.8G  0 part /usr/local
sr0     11:0    1  3.8G  0 rom

# multipath -ll
# lsmod | grep dm_multipath
dm_multipath           32768  0
dm_mod                155648  1 dm_multipath
scsi_mod              249856  9 scsi_dh_emc,sd_mod,scsi_dh_alua,libata,scsi_dh_rdac,sr_mod,dm_multipath,sg,vmw_pvscsi

# ls -l /dev/disk/by-uuid/
total 0
lrwxrwxrwx 1 root root  9 Aug 21 03:42 2019-11-09-00-58-33-00 -> ../../sr0
lrwxrwxrwx 1 root root 10 Aug 21 03:42 428bc961-a28f-430b-8768-1fa14768683d -> ../../sda1
lrwxrwxrwx 1 root root 10 Aug 21 03:42 e633113f-0bf8-47c1-a8b5-55f880d1a608 -> ../../sda2

# lsblk -f
NAME   FSTYPE  LABEL                            UUID                                 FSAVAIL FSUSE% MOUNTPOINT
sda                                                                                                 
├─sda1 swap                                     428bc961-a28f-430b-8768-1fa14768683d                [SWAP]
└─sda2 btrfs                                    e633113f-0bf8-47c1-a8b5-55f880d1a608    2.7G    63% /
sr0    iso9660 SLE-12-SP5-Server-DVD-x86_640372 2019-11-09-00-58-33-00

[+] Steps 1) Run commands to register SLES and install cloud-netconfig-ec2 on the source. This package is helpful in case customer decides to use multiple nics later on (see: https://www.suse.com/c/multi-nic-cloud-netconfig-ec2-azure/ ): 

# SUSEConnect -p sle-module-public-cloud/12/x86_64
# zypper install -y cloud-netconfig-ec2

Confirm:
# rpm -qa | grep cloud-netconfig-ec2
cloud-netconfig-ec2-1.7-27.1.noarch

2) Install MGN agent.

3) Edit launch template to set instance type to Nitro (t3) and enable public IP. 

   If you launch the target as Nitro, it will fail 1/2 as it booted to emergency mode due to nvme device name change (see bug explanation above):

[   11.681603] Adding 1315836k swap on /dev/mapper/nvme.1d0f-766f6c3035636230323137333833373535353965-416d617a6f6e20456c617374696320426c6f636b2053746f7265-00000001-part1.  Priority:-1 extents:1 across:1315836k SSFS
[   11.799105] systemd-journald[722]: Received request to flush runtime journal from PID 1
You are in emergency mode. After logging in, type "journalctl -xb" to view

   So now I'm going to try to run the dracut command, to omit the "multipath" module

4) Run: 

dracut --no-host-only -v --force --force-drivers 'xen-scsifront xen-netfront xen-blkfront nvme-core nvme ena xen-balloon xen-vbd xen-platform-pci xen-vnif xen-scsi' --omit 'multipath'  /var/lib/aws-replication-agent/aws-launch-initrd-`uname -r` uname -r

   Wait 10 minutes.

5) Do target launch, it should boot and pass 2/2 successfully: 

Welcome to SUSE Linux Enterprise Server 12 SP5  (x86_64) - Kernel 4.12.14-122.173-default (ttyS0).
Retrieved from "https://dikapediav2.com/wiki/index.php?title=SUSE_Linux&oldid=172"